Features

• Wirelessly transmit signal up to approx 30 - 50m.
• Waterproof up to 0.5m - showering and occasional bathing
• Compact.

Spec

• Wireless Frequency: 433Mhz.
• Contains 2 x AG10 batteries.
• Width x Depth x Height approx. (cm) = 3.5 x 1.4 x 4.2

Compatibility

• Premier House Alarm
• Elite House Alarm
• Medilarm Classic Personal Alarm for the Elderly
• Medilarm Pro Personal Alarm for the Elderly

Contents

• 1 x Pendant Panic Button & Lanyard

Setup

To pair the Pendant or Wristwatch Panic Button with the Medilarm Pro follow the instructions below:

1. Ensure power switch is off.
2. Insert power adaptor.
3. Hold down S2 button nearest to bank of switches underneath.
4. Keep S2 held down and turn on power switch.
5. After about 30 seconds unit should emit long beep. Release S2 button.
6. Move small dipswitch for required zone (8,9 or 10) to ON position (away from the number).
7. Press button on watch. Unit should beep. If not press again.
8. Return zone switch to off position - nearest numbers.
9. Turn off power switch.
10. Wait 5 seconds and turn on power switch.
11. Wait until unit beeps after acquiring GSM signal - approx 30 secs.
12. Press button on pendant to activate alarm.