Can We Help?
Store
- Elderly Personal Alarms
- House Alarms
- GSM Alarms
- Shed Alarms
- Camera Alarms
- Child Alarms
- Door & Window Sensors
- Vibration Sensors
- PIR Sensors
- Pet-Friendly PIR Sensors
- Panic Buttons
- GSM Antennas
- Sirens
- Gas Detectors
- Smoke Detectors
- Smoke & Heat Detectors
- Water Sensors
- Keypads
- Batteries
- Remote Control Keyfobs
- SIM Cards
- Set-up & install services
Polls
Login
![Wireless Deluxe Strobe Siren (Outdoor) x 2 [Coded Alike]](http://youprotect.co.uk/components/com_virtuemart/shop_image/product/Wireless_Deluxe__4ecbc78d770d1.jpg)
Wireless Deluxe Strobe Siren (Outdoor) x 2 [Coded Alike]
These Wireless Strobe Sirens are designed to be fitted to the outside of your property and can easily be used as an upgrade or in addition to other sirens. These two sirens are coded 'alike' to work from the same wireless transmitter. If you want a siren on the front and back of your property then this option must be chosen. A wired siren can be connected for use inside the property if a Splitter is also purchased.
The Wireless Strobe Siren needs to be connected to a standard 240V AC mains power socket and contains a battery back-up and tamper switch.
It comes with a small wireless transmitter that is wired to the siren output of the alarm by simply attaching the accompanying lead.
Click here to download the Product Spec Sheet
Features
- Bright strobe flash.
- Loud! (110db).
- Integrated tamper switch - siren will sound if moved off the wall.
- Battery backup with LED indicator.
- Outdoor use.
- Siren must be connected to a standard 240V AC power socket.
Spec
- Wireless Range: In ideal conditions max. 100m. Typical conditions 30 - 50m.
- Rated voltage: 12V DC.
- Operating Voltage: 6 - 15V DC.
- Working current: 200mA @ 12V DC.
- Standby current: 6 mA.
- Operating temperature: -20 - +60 degrees C.
- Sound: 110db +/- 3db @ 1m.
- Battery backup: 6V/600 mA.
- Wireless frequency: 433 Mhz.
- Width x Depth x Height approx. (cm) = 11.5 x 7.8 x 19.7
Compatibility
Premier House Alarm 
- Elite House Alarm
- Medilarm Classic
- Medilarm Pro Personal Alarm for the Elderly
Install
The siren has an accompanying wireless transmitter that sends the signal to the siren to activate. The transmitter must be connected to the wireless or wired burglar alarm panel as specified below. No registering of the device to the alarm is necessary, it simply plugs in or connected to two screws.
The internal battery is disconnected whilst in transit. You will need to remove 3 small screws on the rear of the siren and then plug the lead into the red circuit board. As soon as you do this the tamper switch on the rear of the siren is active so wait until you are ready to attach it to the wall!
Premier
- The accompanying lead needs to be plugged into the small wireless transmitter and then the other end of the lead connected to the rear of the alarm panel SP+ (red wire) and SP- (black wire) connections using a small screwdriver
Elite
- The accompanying lead needs to be plugged into the small wireless transmitter and then the other end of the lead plugged into the side of Elite panel where existing siren was connected. No tools are required. The supplied lead then needs to be plugged into the splitter
Customer Reviews:
There are yet no reviews for this product.
Please log in to write a review.
The following products are compatible with this item and can be added to your purchase:
|
A small wired 110db loud siren for indoor use. Comes with approx. 1m of cable attached and two bare wires for use with any intruder alarm.
£12.99
|
Recently Viewed Products
- Wireless Deluxe Strobe Siren (Outdoor) (Category: Sirens)
- Wired PIR Sensor (Category: PIR Sensors)
- Wired Pet Friendly PIR Sensor (25kg) (Category: PIR Sensors)
- Wired Indoor Siren (110db) (Category: Sirens)
