house alarm, wireless home alarms,wireless burglar alarms,wireless gsm alarms
wireless home alarms,wireless burglar alarms,wireless gsm alarms
personal alarms for the elderly, devices for elderly, elderly personal alarm, personal alarms,personal medical alarms, elderly alarm, emergency button, pendant panic button
personal alarms for the elderly,elderly personal alarms,personal alarms, alarms for elderly, devices for elderly, personal medical alarms, medical alert, emergency button, pendant panic button

Can We Help?

Live Chat

Store

Polls

If you could rent an alarm instead of buying which option would you prefer?
 

Login






Information


Wireless Door Window Sensor (500m)
View Full-Size Image


Wireless Door Window Sensor (500m)

£18.48 (inc VAT)
Ask a question about this product

Description

This sensor is attached to a door or window so that when its opened the alarm is triggered. Use these sensors to protect the perimeter of your property and benefit from the 'home arm' feature of your alarm system.

Now compatible with the Alert Pal range

Features

  • Wireless - will transmit up to 500m max. Typical range is 100 - 250m depending on operating conditions
  • On activation upper LED will illuminate
  • On low battery lower LED will illuminate
  • Indoor use only

Spec

  • Frequency: 433 Mhz
  • Width x Depth x Height approx. (cm) = 3.5 x 1.6 x 7

Compatibility

  • Alert Pal tick,yes
  • Premier House Alarm tick,yes
  • Elite House Alarm tick,yes
  • Medilarm Classic cross,no
  • Medilarm Pro Personal Alarm for the Elderly cross,no

Contents

  • Wireless Door Window Sensor (500m range) x 1
  • Magnetic Contact x 1
  • Sticky Pad x 1
  • 12V A23 Battery (MN21/L1028/8LR23) (included free)

Setup

  • Best suited for use where the door and frame are flush but magnetic contact can be on an angle making it suitable for double glazed window and door frames
  • Either use the supplied sticky pads to attach the sensor to the door or window or remove the back cover and screw this to the door and then clip the sensors back on.
  • The wireless code that the vibration sensor uses to uniquely identify itself to the alarm, can be set or altered by carrying out the following steps:
    • Remove the back cover
    • Locate the rows of 3 small pins that point upwards
    • Remove the series of small clips (jumpers) that are attached to one of the pins in each row.
    • Reposition each clip in any order across two pins on the same row (a clip is not required on every row). If you require two sensors to be on the same alarm zone then just make sure they both have the same pattern of clips so they generate the same wireless code.

Customer Reviews:


There are yet no reviews for this product.
Please log in to write a review.

Last Updated: Monday, 21 May 2012 06:34