house alarm, wireless home alarms,wireless burglar alarms,wireless gsm alarms
wireless home alarms,wireless burglar alarms,wireless gsm alarms
personal alarms for the elderly, devices for elderly, elderly personal alarm, personal alarms,personal medical alarms, elderly alarm, emergency button, pendant panic button
personal alarms for the elderly,elderly personal alarms,personal alarms, alarms for elderly, devices for elderly, personal medical alarms, medical alert, emergency button, pendant panic button

Can We Help?

Live Chat

Store

Polls

If you could rent an alarm instead of buying which option would you prefer?
 

Login






Information


Wireless Door Window Sensor [Separate] (100m)
View Full-Size Image


Wireless Door Window Sensor [Separate] (100m)

£18.48 (inc VAT)
Ask a question about this product

This wirelsss sensor is made of 3 parts rather than the usual two giving complete flexibility as to where the sensor is positioned. If the door or window you wish to place this on is hinged on the right (when looking at it from the inside) then use this sensor instead of the standard one. The magnetic contacts are connected to the main sensor via a wire so they can be placed on smaller surfaces such as narrow windows or even mounted inside door frames.

Now compatible with the Alert Pal range

Features

  • Separate contacts.
  • Programmable device code allows multiple sensors per zone.
  • On activation upper LED will illuminate.
  • On low battery lower LED will illuminate.
  • Indoor use only.

Spec

  • Wireless Frequency: 433 Mhz.
  • Wireless Range: 100m max. Typical range is 30 -50m depending on conditions. 
  • Width x Depth x Height approx. (cm) = 3.5 x 1.6 x 7.

Compatibility

  • Alert Pal tick,yes
  • Premier House Alarm tick,yes
  • Elite House Alarm tick,yes
  • Medilarm Classic cross,no
  • Medilarm Pro Personal Alarm for the Elderly cross,no

Contents

  • 1 x Wireless Door Contact Sensor [Separate] (100m).
  • 1 x 12V A27 Battery (included free).
  • 1 x Fixing sticky pads.
  • 2 x Fixing screws.

Install

  • Best suited for use where the door and frame are flush but magnetic contact can be on an angle making it suitable for double glazed window and door frames.
  • Either use the supplied sticky pads to attach the sensor to the door or window or remove the back cover and screw this to the door and then clip the sensors back on.
  • The wireless code that the vibration sensor uses to uniquely identify itself to the alarm, can be set or altered by carrying out the following steps:
    • Remove the back cover.
    • Locate the rows of 3 small pins that point upwards.
    • Remove the series of small clips (jumpers) that are attached to one of the pins in each row.
    • Reposition each clip in any order across two pins on the same row (a clip is not required on every row). If you require two sensors to be on the same alarm zone then just make sure they both have the same pattern of clips so they generate the same wireless code.

Customer Reviews:


There are yet no reviews for this product.
Please log in to write a review.

Last Updated: Monday, 21 May 2012 06:34