Can We Help?
Store
- Elderly Personal Alarms
- House Alarms
- GSM Alarms
- Shed Alarms
- Camera Alarms
- Child Alarms
- Door & Window Sensors
- Vibration Sensors
- PIR Sensors
- Pet-Friendly PIR Sensors
- Panic Buttons
- GSM Antennas
- Sirens
- Gas Detectors
- Smoke Detectors
- Smoke & Heat Detectors
- Water Sensors
- Keypads
- Batteries
- Remote Control Keyfobs
- SIM Cards
- Set-up & install services
Polls
Login
Wireless Door Window Sensor x 3 (100m)
£42.48
(inc VAT)
£50.97
This 3 pack of sensors can be attached to a door or window so that when its opened the alarm is triggered. Use these sensors to protect the perimeter of your property and benefit from the 'home arm' feature of your alarm system.
Now compatible with the Alert Pal range.
Features
- Wireless - will transmit up to 100m max depending on conditions. Typical range is 30 - 50m.
- On activation upper LED will illuminate
- On low battery lower LED will illuminate
- Indoor use only
Compatibility
- Alert Pal

- Premier House Alarm

- Elite House Alarm

- Medilarm Classic

- Medilarm Pro Personal Alarm for the Elderly

Contents
- Wireless Door Window Sensor x 1
- Magnetic Contact x 1
- Sticky Pad x 1
- 12V A23 Battery (MN21/L1028/8LR23) (included free)
Install
- Best suited for use where the door and frame are flush but magnetic contact can be on an angle making it suitable for double glazed window and door frames
- Either use the supplied sticky pads to attach the sensor to the door or window or remove the back cover and screw this to the door and then clip the sensors back on.
- The wireless code that the vibration sensor uses to uniquely identify itself to the alarm, can be set or altered by carrying out the following steps:
- Remove the back cover
- Locate the rows of 3 small pins that point upwards
- Remove the series of small clips (jumpers) that are attached to one of the pins in each row.
- Reposition each clip in any order across two pins on the same row (a clip is not required on every row). If you require two sensors to be on the same alarm zone then just make sure they both have the same pattern of clips so they generate the same wireless code.
Customer Reviews:
There are yet no reviews for this product.
Please log in to write a review.
The following products are compatible with this item and can be added to your purchase:
|
Used on internal and external doors and windows to activate the alarm if they are opened. One part of this contact is attached to a door/window and another to the frame.
£16.99
|
One part of this contact is attached to a door/window and another to the frame. As the door/window is opened slightly the sensor will trigger
£18.48
|






