Can We Help?
Store
- Elderly Personal Alarms
- House Alarms
- GSM Alarms
- Shed Alarms
- Camera Alarms
- Child Alarms
- Door & Window Sensors
- Vibration Sensors
- PIR Sensors
- Pet-Friendly PIR Sensors
- Panic Buttons
- GSM Antennas
- Sirens
- Gas Detectors
- Smoke Detectors
- Smoke & Heat Detectors
- Water Sensors
- Keypads
- Batteries
- Remote Control Keyfobs
- SIM Cards
- Set-up & install services
Polls
Login
Wireless Smoke Detector
£23.99
(inc VAT)
Description
This Wireless Smoke Detector has a built in test button and comes with a 9V battery. Pressing the test button causes the alarm to sound. It connects wirelessly to any compatible house alarm or can be used standalone. When connected to the Medilarm Pro Personal Alarm for the Elderly it will also sound an alarm locally at the base unit as well as dialling out.
Installation is easy as it comes with a detachable base that is screwed to the ceiling first and then the detector just clips on.
Features
- Test Button
- Red LED Alarm indicator
- Uses 9V MN1604 (PP3) battery (included)
- Indoor use only
- Width x Depth x Height approx. (cm) = 10.5 x 3 x 10.5
Spec
- Wireless: 300 - 433 Mhz
- Operating environment: -5°C - 50°C
- Operating Humidity: 10% - 90% no condensation
- Ambient humidity: 10% ~
- Alarm volume: ≥ 75db
- Operating current: 10mA normal and 10-30mA active
Compatibility
- Premier House Alarm
- Elite House Alarm
- Medilarm Classic
- Medilarm Pro Personal Alarm for the Elderly
Setup
- The base of the detector turns slightly to remove the fixing plate.
- Screw the fixing plate to the desired location no higher than 2.5m
- If the smoke alarm came with a small packet of tiny clips/jumpers then these can be optionally installed into the alarm so that a unique wireless code is generated. This is not essential but if it is not done the default code of AAAAAAAA will be sent. If other devices are sending this default code then they will cause the alarm to trigger.
- If no clips were included with the alarm then these have already been installed for you or the smoke detector automatically generates its own code without needing the jumper clips.
- To insert the jumper clips remove the top cover of the smoke detector by placing it face down and inserting a screwdriver into the small locating clip in the battery compartment and twisting. This will release the top cover of the smoke detector.
- Locate the 9 rows of 3 small pins and place the clips across two pins in each row. Every row does not need to be populated and any combination will do.
- Replace the smoke detector lid
- Connect the battery in the detector
- For a wireless install place the wireless burglar alarm or Personal Alarm for the Elderly into learning mode
- Press the test button on the detector
- Once it has been learnt successfully to the alarm mount the detector onto the fixing place by locating the lugs into the holes and turning slightly
- TEST YOUR SMOKE ALARM ONCE A MONTH
Customer Reviews:
There are yet no reviews for this product.
Please log in to write a review.
Recently Viewed Products
- Wireless Smoke and Heat Detector (Category: Smoke Detectors)
- Wireless PIR Sensor [Standard] (Category: PIR Sensors)
- Wireless PIR Sensor [Enhanced] x 3 (Category: PIR Sensors)
- Wireless PIR Sensor [Enhanced] (Category: PIR Sensors)
